Guage

From BME Encyclopedia
Revision as of 04:32, 17 September 2023 by Bmezine (talk | contribs) (Page conversion via llm-mediawiki-rev -jwm)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Comparative gauge chart

Body jewelry and needles tend to be identified by their gauge, using the Browne & Sharpe or American wire gauge system, at least in North America (many other regions simply use metric sizing). The larger the gauge, the smaller the diameter.

Contents

Overview

The diameter of an n gauge wire (commonly written "nga"), is defined to be:

Gauge.png

For larger gauges written as m zeros, let n = −(m − 1). That is, 0ga = 0, 00ga = −1, etc.

Body jewelry is measured using Caliper, Vernier Gauge, a Micrometer or a Gauge wheel by its outer diameter. Needle, in the medical sense (including Play piercing needles), are measured by the inner diameter of the tube (so a 16ga needle will actually have an outer diameter of about 14ga), whereas piercing needles are always measured by their outer diameter. The body jewelry industry uses mostly even gauges between 18 and 00ga, although odd gauges are seen from time to time, usually when non-North American jewelry is being imported. The difference in diameter between gauges two units apart is about 26%. Larger sizes are usually referred to by their measured size.

Common sizes

Please note that some of the fractional sizes below have been rounded to their closest match:

...so on until last table row...
Gauge Fractional size Inches Millimeters
1/32" 0.031" 0.794mm
18ga 0.040" 1.024mm
3/64" 0.047" 1.191mm
16ga 0.051" 1.291mm
14ga 1/16" 0.064" 1.628mm
1 7/8" 1.875" 47.625mm
2" 2 50.8mm

Most body piercings are initially performed at between 14ga and 10ga depending on the piercing, but that is far from a hard rule and there are many arguments debating the subject of initial gauge size.

Gauge sizes do exist larger, but past 00ga people tend to use fractional imperial sizing (ie. "half inch").

Size equivalents

As far as the gauges of common household objects, below is a (vaguely accurate) list started by RAB's Lish:

...so on until last table row...
Gauge Objects
16ga thumbtack tip, big safety pin.
14ga metal coat hanger, bike spoke, wire from triangular business clamp.
0000ga Sharpie marker cap, mini one-use hydrating shampoo/conditioner bottle, Eppendorf reaction vial