Piercing technique

From BME Encyclopedia
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

How a piercing is performed.

Most body piercings done at professional studios are performed using a hubless hollow needle followed by jewelry. To simplify, the piercing procedure generally goes as follows (note: disinfection procedure is omitted, as this is an overview):

  • The placement is marked at the entrance and exit points of the piercing.
  • In many cases, the skin to be pierced is held by clamps, but this is not universal (many piercers prefer a freehand piercing method). Alternately, for piercings such as a rook, a pair of mosquito forceps or similar device may be used to support the tissue, and for piercings such as nostrils and PAs, a receiving tube may be used to both support the tissue and "catch" the needle.
  • The piercing is done with a hollow, hubless needle (no locking mechanism to attach it to a syringe. just a metal tube). For most piercings the gauge of the needle (the outer diameter) is the same as the jewelry, but in cartilage a larger needle is often used to allow for "breathing room", while in piercings such as PAs, a smaller gauge may be used since the tissue will stretch quickly anyway, and it will reduce bleeding slightly.
  • The jewelry is butted up against the back of the needle and is followed through the piercing hole. In some cases a taper is used behind the needle with the jewelry then following the taper. This allows both a jump in gauge if desired as well as making tricky follow-throughs easier and safer.
  • The needle is discarded, leaving only the jewelry in place.

Please note that there are many valid variations on basic piercing technique.

See Also